Julius Fučík - WIP 1

The JULIUS FUCIK was rolling ten degrees with a beam sea. It made life hard on the
soldiers, Captain Kherov noted, but they were doing well for landsmen. His own
crewmen were dangling over the sides with sprayguns, painting over the ship’s
Interlighter markings, preparatory to replacing them with the Lykes Lines emblem. The
soldiers were cutting away parts of the superstructure to conform with the silhouette of
the Doctor Lykes, a U.S.-flag Seabee carrier remarkably similar to the Fucik. The Soviet
ship had been built years before in Finland’s Valmet yard from plans purchased in
America. Already the elevator winch area aft had been painted completely black to match
the American line’s house colors, and a black diamond had been painted on both sides of
the superstructure. Gangs of men were changing the shape and colors of the two funnels
with prefabricated parts. The hardest job remaining was the paintwork on the hull. The
Interlighter markings were made of twentyfoot letters. Replacing them called for the use
of canvas templates, and the lettering had to be neat and exact. Worst of all, there was
no way to check the workmanship short of launching a ship’s boat, something he had
neither the time nor the inclination to do.
"How long, Comrade Captain?"
"Four hours at least. The work goes well." Kherov couldn’t hide his concern. Here they
were, mid-Atlantic, far from the usual sea lanes, but there was no telling-
"And if we are spotted by an American aircraft or ship?" General Andreyev asked.
"Then we will find out how effective our damage-control drills have been-and our
mission will be a failure." Kherov ran his hand along the polished teak rail. He’d
commanded this ship for six years, taken her into nearly every port on the North and
South Atlantic. "We’ll get some way on. The ship will ride more easily on a bow sea."

Excerpt from Red Storm Rising (Tom Clancy (1986))

Aris sent me the blueprints for this ship in November 2009, and I ran into it while cleaning my harddrive a few days ago. As I need a merchant for the scenario I'm building forces for, why not the Fučík? I will keep her in her original scheme though, not the cover she used to sail to Iceland. So the Soviet flag will fly on this one....so much for a "neutral" merchant.  ;)

Start is the same as always. Check the blueprints, check the data online in one of the many ships directories, calculate the correct sizes in 1/3000 and note what goes where and what sizes plasticcard are needed. It's not rocket science, believe me. The hardest thing you have to do is shape and sand the correct bow, for the rest the Fučík is one big box with some superstructure, a barge lift and a open stern. She's a big ship, 90mm from bow to stern.

So here is a teaser pic which shows nothing but the bare hull and the first sanded down coat of filler, I'm trying a new one that is quite light and quick drying.  Not as quick as I hoped so I tore a few chips out of it. Oh well, nothing a second coat and some sanding can't fix.

Don't look like much, does it?  :lol: